This file is from Wikimedia Commons and may be used by other projects.
The description on its file description page there is shown below.
Summary
DescriptionLamp inrush current.png
English: This oscillogram shows a bench power supply current limit circuit operate on the inrush surge of a small incandescent lamp. Lamp current is in yellow, approximately 2 amps/vertical division, power supply voltage is pink, 5 volts/division. For a fraction of a millisecond, the lamp attempts to draw about six times its steady-state current. The overcurrent protection circuit of the power supply dropped the output voltage from 13.9 V down to about 3 volts to limit current and protect the power supply. After about 100 milliseconds, the foldback current limit circuit resets and the voltage returns to full value - a small extra surge of lamp current occurs when the voltage is restored, then the lamp slowly returns to its steady state current draw of 2.3 amps.
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the licence, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible licence as the original.