File:PlasticsInjectionMoulder-die.jpg
From Vigyanwiki
Size of this preview: 800 × 575 pixels. Other resolutions: 320 × 230 pixels | 640 × 460 pixels | 1,024 × 736 pixels | 1,280 × 920 pixels | 1,869 × 1,344 pixels.
Original file (1,869 × 1,344 pixels, file size: 297 KB, MIME type: image/jpeg)
Summary
| Description | Photo shows one half of a die producing a decorative paperclip (approx 50mm x 100mm), mounted to the movable platen in the workarea of an injection moulder. The injector nozzle is shown retracted at the right side of the photo. The limit switch to control the closing position of the hydraulics (that opens and closes the die ) is visible in the foreground, mounted on the fixed platen. |
| Date | |
| Source | Photograph taken by Glenn McKechnie, September 2005. |
| Author | Glenn McKechnie |
Licensing
This file is licensed under the Creative Commons Attribution-Share Alike 2.5 Generic licence.
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the licence, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible licence as the original.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 16:54, 2 September 2005 | | 1,869 × 1,344 (297 KB) | wikimediacommons>Graibeard | Photograph taken by Glenn McKechnie, September 2005. {{Cc-by-sa-2.5}} |
File usage
The following page uses this file:
